- 11 -
positions. To raise it, push it upwards. To lower it, push
in the two levers and move the footrest down (fig_b).
6
FIVE-POINT SAFETY HARNESS: To fasten the safety
harness, push the two waist strap buckles (with the
shoulder straps attached) into the leg divider until
they click into position (fig_a). To release it, press the
center of the buckle while pulling the waist strap
outwards (fig_b). To tighten the waist strap, pull the
ends on both sides. To loosen it, do the opposite.
7 The shoulder straps of the harness can be set at two
different heights. Partially remove the fabric covering
(fig_a), release the shoulder straps from the backrest
(fig_b) and pull them out from the fabric covering.
Insert the ends of the shoulder straps in the other
slots in the fabric covering and the backrest (fig_c),
then put the fabric covering back into the right
position on the backrest.
8 USE WITHOUT THE TRAY: to use the seat at the table,
remove the tray. To clip the tray on the rear supports
of the high chair, align and engage it with the
attachments (fig_b).
9 CLOSING AND REOPENING THE TRAY: Pull the central
lever underneath the tray towards you (fig_a) and
extend it as far as the red markers (fig_b), then swing
it upwards to lock it in place (fig_c). To reopen the
tray, press the lever under the armrest (fig_d), swing
it downwards, then pull the central lever towards you
and put the tray in one of the positions for use.
10 FOLDING UP: Before folding up the high chair, ensure
that the wheels are facing inwards (fig_a). Press the
red buttons (fig_b) and fold up the high chair (fig_c).
Fig_d shows a folded up high chair.
11 REMOVABLE COVERS: To remove the covers of the
seat, pull off the upper part of the fabric covering and
pull the harness straps through the backrest (fig_a)
and the fabric covering (fig_b). Lower the backrest
and pull out the leg divider strap from under the seat
(fig_c).
12
Unbutton the sack at the sides (fig. a) and pull up to
remove it (fig. b).
SERIAL NUMBERS
13 Information about the production date of the SIESTA
can be found on the seat.
_ Product name, date of manufacture and serial
number.
This information is required for any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place. The maintenance have to be
regularly.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and
free of dust and sand and, if necessary, lubricate
with light machine oil all metallic moving parts.
Check all nuts and bolts for tightness and tighten
when required. check all coverings for bolts and
sharp edges and replace when required. check swing
seat and attachments for evidence of deterioration.
Replace when required in accordance with the
manufacturer's instructions.
CLEANING THE SACK: Wash with a damp cloth and
neutral detergent. Do not wring. Do not use chlorine
bleach. Do not iron. Do not dry clean. Do not use
solvents for stain removal. Do not spin dry.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213 fax 0039/039/33.09.992
e-mail [email protected]
website www.pegperego.com
Summary of Contents for Siesta
