background image

- 12 -

  EN_English

   Thank you for choosing a Mamas & Papas 

product.

    WARNING

  _ IMPORTANT: read the instructions carefully 

before use and keep them for future reference. 

The child may be hurt if you do not follow these 

instructions.

  _ SWITCH: This item is designed to carry 1 child in 

the seat.

  _ Do not use this item for a number of occupants 

greater than that intended by the manufacturer.

  _ The Switch C Switch car seat is approved 

for infants from birth up to 15 kg  

in weight.

  _ The Switch chassis is designed for use with 

Mamas & Papas Surefix products: the Switch 

c Primo Viaggio car seat (0+ group) is 

approved for children from birth up to 13 kg 

of weight. The Switch c “Navetta” or 

“Primonido” bassinet unit is approved for children 

from birth up to 10 kg of weight. If using with the 

“Navetta” or the “Primonido”, refrain from using 

the rear ledge.

  _ Before use check that the Mamas & Papas 

Surefix products are correctly fixed to the item.

  _ It may be dangerous to leave your child 

unattended.

  _ Always use the 5-point harness and attach the 

waist strap to the leg divider strap.

  _ Be careful not to hurt the child when adjusting the 

mechanisms (handlebar, backrest).

  _ Always apply the brake when stopped and when 

positioning the child in the seat or when removing 

the child from the seat.

  _ Assembly and preparation of the product, plus 

cleaning and maintenance operations, must be 

carried out exclusively by adults.

  _ Do not use this item if there are parts missing or 

signs of breakage.

  _ Before use check that all the attachment 

mechanisms are correctly engaged.

  _ Do not insert fingers into the mechanisms.

  _ Any load hanging on the handlebar or the handles 

can make the stroller/carriage unstable; follow the 

manufacturer’s instructions for max load capacity. 

  _ Do not place loads over 3 kilos in the basket. Do 

not place in the bottle holder weights heavier than 

stated or hot drinks. Do not place in the hood 

pockets (if applicable) weights over 0.2 Kg. 

  _ The front bar is not designed to support the 

child’s weight. It is not designed to keep the child 

in the seat and does not substitute for the waist 

belt.

  _ Do not use the item near to stairs or steps, heat 

sources, naked flames or dangerous objects 

within reach of the child.

  _ The use of accessories not approved by the 

manufacturer could be dangerous.

  _ This item is not suitable for jogging or roller 

skating.

  _ Do not use the rain canopy (if present) indoors 

and regularly check to ensure the child is not 

too warm; do not park the stroller close to 

heat sources and keep well away from lighted 

cigarettes. Ensure the rain canopy is not 

interfering with any moving parts of the carriage 

or stroller; always remove the rain canopy before 

folding your carriage or stroller. 

  _ Do not use the release levers to move or lift the 

stroller when the child is in it.

  _ WARNING: Do not add a mattress pad.

   Switch, the compact stroller with reversible 

baby seat!

   Full version with hood, cover and rain canopy.

   Sports version with hood and rain canopy (Switch 

compact On Track Sportivo).

   FEATURES OF THE ITEM

  _ The item is numbered progressively.

  _ Switch is a stroller with a reversible seat: facing 

the person pushing or facing forwards.

  _ Switch is made up of two elements: Switch 

CHASSIS and Switch SEAT.

   COMPONENTS OF THE ITEM

   Check the contents of the packaging and if you 

have any complaints please contact Mamas & 

Papas Customer Care.

  _ Switch Chassis: a basket, 2 swiveling or locking 

front wheels, 2 rear wheels with a central brake 

bar and a drink holder.

  _ Switch baby seat: front bumper bar; hood; cover; 

rain canopy.

  _ Switch On Track Sportivo baby seat: front bar; 

hood; rain canopy.

   INSTRUCTIONS

  1 PACKING PROTECTION: before opening the 

chassis remove the protection (fig_a), otherwise it 

will not open correctly (fig_b).

  2 OPENING: Raise the levers on the two handles 

together (fig_a) and pull upwards until the chassis 

is completely open (fig_b). Check that the chassis 

is correctly opened: the side tubes must be 

locked together (fig_c).

   If the front clips do not fasten properly, push 

down on the seat until they click into place.

  3 FITTING THE FRONT WHEELS: First check that 

the washer is in place, as shown in the figure, 

lower the levers on the two front wheels (fig_a) 

and push them until they click into place (fig_b).

  4 FITTING THE REAR WHEELS: Push the wheels 

until they click into place (fig_a) and check that 

they are properly attached (fig_b).

  5 Finally, attach the element in the centre of the 

brake bar to the chassis (fig_a) and check that it 

has slotted into place properly (fig_b).

  6 FITTING THE BASKET: Slip the loops onto the 

hooks at the front (fig_a) and the rear (fig_b).

  7 FITTING THE CUP HOLDER: insert the cup holder 

on the corresponding peg and press down until it 

clicks into place. The cup holder can be attached 

to either side of the chassis.

  8 ADJUSTABLE HANDLES: Switch compact: To 

raise or lower the handles, hold the button down 

(fig_a) and adjust them (fig_b).

  9 FIXED OR SWIVELLING FRONT WHEELS: Lift the 

levers to prevent the wheels from swiveling (fig_a) 

and lower them to allow the wheels to swivel 

(fig_b). On uneven surfaces, the wheels should be 

set to their fixed position.

 10 BRAKES: Press a brake lever to immobilize the 

chassis (fig_a) and lift the lever to release it 

(fig_b).

 11 MOUNTING THE SEAT TO THE CHASSIS: the 

reversible seat can be attached to the chassis 

either facing the person pushing the stroller 

(fig_a), or facing forwards (fig_b), place the 

seat on the chassis so that it is aligned with the 

relative symbols and press downwards with both 

Reviews: