ISSUED: 08-12-91 SHEET #: 029-9004-8 12-14-05
Visit the Peerless Web Site at www.peerlessmounts.com
For customer service call 1-800-729-0307 or 708-865-8870.
2
of
4
A
J
∅
5/32" (4 mm)
For attachment to a wood stud wall
drill three
5/32" (4 mm) dia. holes 2 1/2" (65 mm) deep
into
stud centers
. Attach wall arm (
A
) with #14 x 2.5"
(6 mm x 65 mm) wood screws (
J
).
Make sure that swivel race tab on lower tray (
B
)
is positioned as shown.
90
Ο
60
Ο
30
Ο
30
Ο
60
Ο
90
Ο
B
K
OPTIONAL: Install two M5 x .8 x 6 mm phillips
screws (
K
) into swivel restriction holes. Swivel
stop positions are noted next to each hole.
• Tighten wood screws so that wall plate is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finder is highly recommended.
WARNING