ISSUED: 07-31-09 SHEET #: 090-9183-2 10-29-09
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
6 of 7
Attaching Dual Arm Assembly to Base
Attach VESA plates to dual arm column (
A
) using one M6 hex head screw (
G
), one M6 split lock washer (
F
) and
one M6 flat washer (
e
) per arm as shown below. Tighten fasteners using 5 mm allen wrench (
R
).
Unscrew M10 fasteners (J, K, and L) from threaded rod.
Attach dual arm column (
A
) to base (
D
) by hand threading M10 washer (
J
), M10 split lockwasher (
K
), and M10
wingnut (
L
) through arm assembly threaded rod as shown in figure 4.1. Ensure that all fasteners are tightened
securely.
• Be sure display is unplugged from any electrical outlet while assembling dual stand.
• Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can
cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become
detached.
Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
WARNING
G
A
F
e
3
4
fig 4.1
J K
L
THREADED ROD
