background image

18 of 18

ISSUED: 07-16-10  SHEET #: 061-9050-4   03-04-11

© 2008 Peerless Industries, Inc. 

Peerless Industries, Inc. establishes a warranty period of fi ve years for products manufactured or supplied by Peerless. This period commences from the date of 

sale of the product to the original consumer, but will in no case last for more than six years after the date of the product’s manufacture. During the warranty period 

such products will be free from defects in material and workmanship, provided they are installed and used in compliance with the instructions established by 

Peerless Industries, Inc. Subject to applicable legal requirements, during the warranty period Peerless will repair or replace, or refund the purchase price of, any 

such product which fails to conform with this warranty.

Any other warranties prescribed by the law which may apply with respect to such products also are limited in duration to the warranty period specifi ed in this 

Limited Five-Year Warranty. 

This warranty does not cover damage caused by (a) service or repairs by the customer or a person who is not authorized for such service or repairs by Peerless 

Industries, Inc., (b) the failure to utilize proper packing when returning the product, (c) incorrect installation or the failure to follow Peerless’ instructions or warnings 

when installing, using or storing the product, or (d) misuse or accident, in transit or otherwise, including in cases of third party actions and force majeure.

In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product, whether or not secured by a security 

device which may be included with the product.

This Limited Five-Year Warranty is in lieu of all other warranties, expressed or implied, and is the sole remedy with respect to product defects. No retailer, dealer, 

distributor, installer or other person is authorized to modify or extend this warranty or impose any obligation on Peerless in connection with the sale of any product 

manufactured or supplied by Peerless.

This warranty gives specifi c legal rights, and you may also have other rights provided by the national legislation of the country in which you purchased such 

product.

LIMITED FIVE-YEAR WARRANTY

www.peerlessmounts.com

© 2008 Peerless Industries, Inc. 

Limited one-year warranty on corrosion.

LIMITED ONE-YEAR WARRANTY

www.peerlessmounts.com

Summary of Contents for FPE42F-B



















Reviews: