5 of 30
ISSUED: 06-10-05 SHEET #: 095-9223-4 08-30-05
Remove cord covers from wall arm assembly (
A
) as shown in figure 1.3. Use wall plate as template to mark center of
holes along the vertical line drawn in step 1. Make sure wall plate is level, then drill two 9/32" (7 mm) holes through
cabinet wall where marked.
Installation to Side of Cabinet
WALL
VERTICAL LINE
WALL PLATE
Fasten wall arm assembly (
A
) to side of cabinet using two 1/4-20 flat head screws (
C
), washers (
D
), and 1/4-20
nylock nuts (
E
) as shown in figures 1.4 and 1.5.
Skip to step 2 on page 8.
CABINET SIDE WALL
A
C
D E
A
D
E
C
fig. 1.5
CABINET
SIDE
WALL
Side View of Cabinet
Cutaway View of Cabinet Side Wall
Isometric View of
Cabinet Side Wall
1-2
1-1
fig. 1.3
fig. 1.4
A
CORD COVERS
