background image

ISSUED: 11-20-10  SHEET #:120-9093-1

Visit the Peerless Web Site at www.peerlessmounts.com 

           For customer care call 1-800-865-2112 or 708-865-8870.

2 of 5

Parts may appear slightly different than illustrated. 

A

B

C

D

E

Before you begin, make sure all parts shown are included with your product.

 IMPORTANT! Read instruction sheet before you start installation and assembly.

Description Qty. Part 

#

A

wall plate

1

201-1771

B

front plate

1

201-1770

C

wood screw

4

5S1-015-C03

D

1/4-20 self-tapping screw

4

520-1592

E

10-32 self-tapping screw

8

520-1627

 Parts List

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings 

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US 
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact 
your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, has experience with basic building 

construction, and fully understands these instructions.

•  Make sure that the supporting surface will safely support the combined load of the equipment and all attached 

hardware and components.

•  Never exceed the Maximum Load Capacity. See page one.

•  If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of 

an "edge to edge" stud fi nder is highly recommended.

•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

•  Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding 

power.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal 

injury.

•  This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION 

 

HARDWARE REQUIRED

 • 

 

Wood 

Stud   Included

  Wood Beam 

 

 

Included

  Solid Concrete 

 

 

Do not attach except with Peerless Concrete Anchor Pack - ACC204;

  Cinder Block 

 

 

Do not attach except with Peerless Concrete Anchor Pack - ACC204;

Metal Stud 

 

 

Do not attach except with Peerless Metal Stud Accessory Kit - ACC415;

Brick 

   Contact 

Qualifi 

ed 

Professional

Other or unsure?   

 

Contact Qualifi ed Professional

 WARNING

Tools Needed for Assembly

•  stud fi nder ("edge to edge" stud fi nder  is recommended)

•  #2 phillips screwdriver, #3 phillips screwdriver, 

3/8" socket wrench

• drill 

•  5/32" (4 mm) bit for wood stud wall

• level

Summary of Contents for ACC625






Reviews: