background image

Sealtrode Series P 
Sealed Electrode Floatless 
Pump controller 

 

Instructions 

 

• 

Installation 

• 

Operation 

• 

Maintenance 

 
 
 

Read this entire book 

before attempting to install, operate or repair this control. 
Properly installed, your Peerless control will five you 
satisfactory, dependable service. We urge that you read 
carefully these step-by-step instructions, to simplify any 
problems of installation, operating or repair. 
 
Failure to read and comply with installation and 
operating instructions will void the responsibility of the 
 
 
 
 
 
 
 
 
New equipment manufactured by Seller is warranted to 
be free from defects in material and workmanship under 
normal use and service for a period of one year from 
date of shipment;  Seller’s obligation under this warranty 
being limited to repairing or replacing at its option any 
part found to its satisfaction to be so defective provided 
that such part is, upon request, returned to Seller’s 
factory from which it was shipped, transportation 
prepaid.  This warranty does not cover parts damaged 
by decomposition from chemical action or wear caused 
by abrasive materials, not does it cover damage 
resulting from misuse, accident, neglect, or from 
improper operation, maintenance, installation, 
modification or adjustment.  This warranty does not 
cover parts repaired outside the Seller’s factory without 
prior written approval.  Seller makes no warranty as to 
starting equipment, electrical apparatus or other material 
not of its manufacture, since the same are usually 
covered by warranties of the respective manufacturers 
thereof. 
 
 
 
 
 
 
 
 

Manufacturer and may also result in bodily injury as well 
as property damage. 
 
This book is intended to be a permanent part of your 
Store in a convenient location for ready reference. If 
these instructions should become soiled obtain a new 
copy from Peerless Pump. Include control model and/or 
serial number with you request. 
 
 
 
 
 
 
 

WARRANTY 

 
In   the   event,    notwithstanding    the    terms   of    this 
agreement, it is determined by a court of competent 
jurisdiction that an express warranty has been given by 
Seller to Purchaser with respect to the head, capacity or 
other like performance characteristics of said equipment, 
Seller’s liability for breach of the same shall be limited to 
accepting return of such equipment FCA. plant of 
manufacture, refunding any amount paid thereon by 
Purchaser (less depreciation at the rate of 15% per year 
if Purchaser has used the equipment for more than thirty 
(30) days) and canceling any balance still owing on the 
equipment. 
 
 
 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY 
OTHER WARRANTIES, EXPRESSED OR IMPLIED, 
AND SELLER SPECIFICALLY DISCLAIMS ANY 
IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. 

 
 
 
 
 

4848247 

Rev. 8/78 

 

Summary of Contents for Sealtrode P Series









Reviews: