16
2020-11-13 #:180-9149-6 (2021-11-02)
Power On/Off the Display
Power on your display using the remote control or the power button on the bottom, right-hand side of
the display. The display will power on but image may not appear for several seconds as it completes
its power up sequence.
OPERATING INSTRUCTIONS
Onboard Controls
Direct Mode
: Allows for quick access to source selection, volume settings and channel selection.
Menu Mode
: Press the Menu button to access Menu Mode and activate the On Screen Display
(OSD). For a description of OSD operation refer to the next section.
The keypad buttons are assigned as indicated in the table below.
Point the remote control at the IR sensor located
at the top, left-hand corner of the display when in
landscape, or the top right-hand corner when in
portrait, then press the power button.
Network Functionality:
Allow a boot cycle time of approximately
2 minutes and 20 seconds for network
functionality. Accessing the network functions
prior to the completion of the boot cycle will
results in a "Not Ready" exclamation.
PO
WER
TV
TV/SPK
SPK
1
3
2
4
6
5
7
•
9
LAST
8
0
OK
AUX1
AUX2
MUTE
VOL
MENU
GUIDE
CH
INFO
INPUT
EXIT
LED Light
TV Status
Solid
Off
Blinking
Boot up
Off
On
Direct Mode
Menu Mode
On/Off
On/Off
Input Select
Input Select
Menu
Return
Channel Up
Up
Channel Down
Down
Volume Up
Right/OK
Volume Down
Left/OK
Landscape
orientation