6
2015-10-15 #:180-9068-1
Programming the Remote by Searching for Codes
Manufacturer's Codes
CABLE BOX Codes
1.
Turn on the device that you would like to program into your remote using the power button the
the
device.
2.
On the Peerless-AV Universal remote control, press and hold the button that you are trying to
program (TV, DVD, CBL, or AUX) and the OK button simultaneously for 2 seconds. The Red
LED on the remote will illuminate.
3.
Press and release the CH Up button once to start the code search through the list of available
codes. Each time the CH Up button is pressed, the remote will send an Off command to the
device using the next code on the list. Each time the CH Up button is pressed, the Red LED on
the remote control will illuminate for verifi cation.
4.
Continue pressing the CH up button until the device you are trying to control turns off. Then
press the Device button that you were trying to program (TV, DVD, CBL, or AUX). The Red LED
will blink two times.
5. To
confi rm the code will work properly, press the Device button again. Then press the power
button. The device should turn on; However, if the device did not turn on, please repeat steps
1-4
above.
Brand
Codes
ABC
107
109
113
117
131
135
144
ALLEGRO
112
ANTRONIX
045
121
ARCHER
045
121
130
132
CABLE TENNA
121
CABLE VIEW
121
CENTURY
132
COLOUR VOICE
002
003
COMTRONICS
039
110
CONTEC
114
DIRECTOR
202
GARRARD
132
GC ELECTRONICS
045
GEMINI
045
048
GENERAL INSTRUMENT
202
092
099
100
125
126
127
131
135
HAMLIN
139
142
145
HITACHI
135
HYTEX
144
JASCO
132
JERROLD
202
048
107
109
117
125
126
127
131
135
MAGNAVOX
111
MEMOREX
106
MOTOROLA
201
202
