8 of 11
ISSUED: 08-31-11 SHEET #: 009-9053-7 07-25-12
Attaching Display using VESA 100, 200 or VESA 300 Mounting Pattern
• If screws don't get three complete turns in the display inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to display or product may fail.
WARNING
If you have any questions, please call Peerless customer care at
1-800-865-2112
.
If you have any questions, please call Peerless customer care at
1-800-865-2112
.
Select the screws from the baffl ed fastener pack that best fi t your display.
Begin with the shortest length screw,
hand thread through multi-washer and
adapter plate (
B
)
into display as shown below. Screw must make at least
three full turns into the mounting hole and fi t snug into place. Do not overtighten. If screw cannot make three full
turns into the display, select a longer length screw from the baffl ed fastener pack. Repeat for remaining mounting
holes and tighten screws.
NOTE:
Spacers may not be used, depending upon the type of display.
Select the screws from the baffl ed fastener pack that best fi t your display. Begin with longer length screw, hand
thread through multi-washer, adapter plate (
B
) and spacer in that order into display as shown below. Screw must
make at least three full turns into the mounting hole and fi t snug into place. Do not overtighten. If screw cannot
make three full turns into the display, select a longer length screw from the baffl ed fastener pack. Repeat for
remaining mounting holes and tighten screws.
For Flat Back Display
For Bump-out or Recessed Back Display
7-1
7-2
B
B
DISPLAY
DISPLAY
fi g. 7.1
MULTI-WASHER
SCREW
MULTI-WASHER
SCREW
fi g. 7.2
SPACER