peerless-AV peerAir HDS-WHDI100T, User Manual, Page: 12 / 36

12 of 34
ISSUED: 01-09-13 SHEET #: 180-9045-1
C. Select SETUP using the up or down buttons on the remote control and Press OK to display the SETUP
screen.
D. Ensure that the LED light on the Transmitter that is being paired is illuminated purple then Select Add New
Transmitter from the OSD menu and press OK on the remote control.
E. At this time the Receiver will search for a Transmitter to pair to. When the Receiver fi nds and pairs to a
Transmitter, the system will reboot. When the power light is solid blue and the source light is blinking blue, the
system is paired (this process takes about 60 seconds).
NOTE: When both the Transmitter and Receiver are in pairing mode they will fi nd each other and pair
automatically.
SETUP:
Add New Transmi Ʃ er
Remove Transmi Ʃ er
Modify Transmi Ʃ er Name
Return
2 1
Select Transmi Ʃ er Number:
WHD200-1
WHD200-2
SETUP
SETUP:
Add New Transmi Ʃ er
Remove Transmi Ʃ er
Modify Transmi Ʃ er Name
Return