4 of 4
ISSUED: 10-30-10 SHEET #:125-9164-2 09-14-11
5
DISPLAY
DISPLAY BASE
NOTE:
Display and base may appear
different than illustrated
Installation of Security Screws for Base to Display Attachment
G
I
32" Display Base (No Screws Required)
Attach display to base
using hardware provided with display using the manufactures installation manual.
42" Display Base
Attach display to base
using two M5 x 20 mm socket pin screws (
G
), two #10 split lock washers (
H
), and two
#10 flat washers (
I
) into bottom holes as shown below.
Tighten with 4 mm security allen wrench (
F
).
Use screws supplied with display for remaining holes
.
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
42" Display Base Attachment Location
(note orientation of screws)
H