2
2013-02-19 #:180-9046-1
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
Display center.
ENG
x3
Screws must get at least three
full turns and fi t snug.
ENG
Do not overtighten screws.
ENG
ENG - Before installing make sure the supporting
surface will support the combined load of the equip-
ment and hardware. Screws must be tightly secured.
Do not overtighten screws or damage can occur and
product may fail. Never exceed the Maximum Load
Capacity. Always use an assistant or mechanical
lifting equipment to safely lift and position equipment.
This product is intended for indoor use only. Use of
this product outdoors could lead to product failure or
personal injury. Be careful not to pinch fi ngers when
opening and closing mount from the wall. For support
please call customer care at 1-800-865-2112.
WALL
HARDWARE
CONSTRUCTION REQUIRED
• Wood Stud
Included
• Wood Beam
Included
WARNING
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Tools Needed for Assembly.
ENG
1/8"
(3mm)