peerless-AV ACC-DSV745 Installation And Assembly Manual Download Page 1

ISSUED: 06-04-10   SHEET #: 120-9083-2  05-14-12

Installation and Assembly:

Universal Tilt Wall Mount for LCD and Plasma Flat Panel 

Screens 61''- 102'' (155 - 259 cm)

Features:

 

•  Universal tilt brackets easily hook onto wall plate for fast installation

•  Adjustable up to 15° of forward tilt and up to -5° backward tilt for 

optimal viewing angle

•  One-touch tilt for effortless adjustment

•  Pre-tensioned universal tilt bracket allows for tilt angle adjustment in 

one easy motion.

•  Easy grip handle locks the screen position into place

•  Optional IncreLok feature offers fixed tilts at -5°, 0°, 5°, 10° and 15° 

increments

•  Includes Sorted-For-You™ fastener pack for installation to wood 

studs, concrete, and cinder block

Accessories:

  

•  DS-ACC-LDCM

   cable management accessory (optional)

•  DS-VL-H024 24" wall plate (optional) 

•  DS-VL-H036 36" wall plate (optional)

•  DS-VL-H048 48" wall plate (optional)

•  DS-VL-H060 60" wall plate (optional)

•  DS-VL-H072 72" wall plate (optional)

NoTe:

 Read entire instruction sheet before you start installation and assembly. 

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings 

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US 

customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact 

your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, has experience with basic building 

construction, and fully understands these instructions.

•  Make sure that the supporting surface will safely support the combined load of the equipment and all attached 

hardware and components.

•  Never exceed the Maximum Load Capacity. See page one.
•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
•  Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding 

power.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal 

injury.

WARNING

Models:

 ACC-DSV745, ACC-DSV745-P

Maximum Load Capacity: 350 lb (159 kg)

Summary of Contents for ACC-DSV745








Reviews: