ISSUED: 01-30-07 SHEET #: 009-9037-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
2
of 4
With the electronic component dismounted, place belt assembly over electronic component and reposition the
components according to dimensions in drawing below.
Note
: keep buckle closer to left side of the electronic
component to allow for movement when tightening belt assembly. Trim off the end of the belt if necessary, then lightly
burn the end of the belt to prevent fraying. Repeat step 3 for the other side of the electronic component.
6”
A
B
Make sure that electronic component surface is clean of grease, oil and dust. Once all components are in place,
remove sticker from bottom of belt guides and firmly press them onto the electronic component.
12”
2”
electronic component
