Via Monti Urali, 29 – 42122 Reggio Emilia (Italy) • Telephone: +39 0522 557735 • [email protected]
22. This product might produce levels of sound able to damage hearing. Pay particular
attention and do not work at high or uncomfortable levels of volume for long. In case
of troubles or loss of hearing, consult an audiometric specialist.
Connection to the Means and Absorbtion
Check that you have power enough for the amplifier (verify the data at the end of this
manual). The electric mains voltage must be the same as indicated on the panel of the
amplifier.
Pay attention:
before making any audio connection remember that it is a goods
rule to switch off the amplifier (by turning PowerCon connector anticlockwise)
and to keep the level of the input signal to the minimum, during the switching on.
User’s Liability
Dangerous Output Tensions
Amplifiers can generate dangerous output tensions. Do not touch the possible
uncovered cables of cone loudspeakers while the amplifier is working.
Output Connections
Before connecting an output charge to an amplifier the user stands liable for
checking that the connection falls into the specifications of this device in order
not to damage the amplifier and/or the charge.
Radio Interferences
A sample of this product was tested and homologated according to the limits of the
Electromagnetic Compatibility Directive (EMC). These limits have been fixed to give a
reasonable protection from the dangerous interferences of electric devices. If not installed
or used according to the present instructions for use, this product might interfere with other
devices, for instance radio receivers. Otherwise, the possibility of interferences in a
particular installation is not ruled out in any case. If the product interferes with devices of
reception and transmission (this condition can be verified by turning the device on and off),
the user would have to try to eliminate the interference observing one or more of the
following measures:
Increasing the distance between the device and the receiver.
Connecting the device to a port placed on a circuit different from the one the receiver is connected
to.
Turning or move the aerial of the reception device.
Checking that the concerned unit conforms to the EMC immunity limits (it must have the EC brand).
All the electric devices sold in EEC must be homologated referring to the immunity from
electromagnetic fields, high tensions and radio interferences.
Contact qualified personnel.
