PedigreeTechnologies.com | Support: (701)-499-0022
3
Installation Steps, Continued
STEP ONE
Choose a location to attach the iOn Tag that is
not obstructed, preferably on the exterior of the
equipment.The tag must not be placed inside
a metal encloser. Prepare the surface of the
equipment, removing all dirt and grease from the
surface using alchohol or another type of degreaser.
Installation
ION TAG
STEP TWO
Remove the film from the adhesive pad on the back
of the iOn Tag.
STEP THREE
Press the sticky side to the surface of the equipment
to secure.
STEP FOUR
Remove the activation tab labeled “SNAP OFF TO ACTIVATE”
