PedigreeTechnologies.com | Support: (701)-499-0022
3
CameraView
JC400
Installation Steps, Continued
Determine proper placement of camera on the
front windshield.
(Dry fit only. It’s important to run
cabling to power source and determine where it will
fit properly.)
• High on the windshield next to the rearview mirror
area right of center divider
• Highest possible placement within the wiper
blade path
• Avoid any overhanging exterior sun visor or other
materials on glass including rock chips or cracks.
Dry Fit
Installation Steps, Continued
Power Cable
During the dry fit, make sure you can route the cable inside the headliner and A pillar to the ELD
cradle (or fuse panel for direct wire installations).
(Avoid airbags and other hardware inside the
A pillar.)
Cables and wiring should be routed behind the dash and should not be visible after
installation is complete.
(Connect the accessory harness to cradle or power/fuse panel before
actually routing the cables in the A pillar.)
