Pedibal Navigata Cite, User Manual, Page: 2 / 13

1
R
Introduction
Thank you for purchasing your e-bike from Pedibal. We take pride in bringing you a quality
product that will offer you years of enjoyment.
We take pride in our bikes and are sure it will offer you years of stable performance and
longevity - we take safety very seriously and are always available for support should your bike
develop any mishaps.
This manual contains details of the product and its features, and information on its operation and
maintenance. Please read it carefully and familiarise yourself with the e-bike before using it in
order to ensure safe use. Be sure to retain this manual as future reference.
Due to the nature of the product, this manual includes many warnings and cautions concerning
the safe operation and consequences if safe operation is not performed in respect to operation
and maintenance of this product. All information in the manual should be carefully studied and if
you have any questions you should contact Pedibal prior to further use.
We cannot anticipate every situation or condition which may occur whilst riding, and therefore
we make no representation about the safe use of the bicycle under all conditions. There are risk
associated with the use of bicycles which are beyond our control, and are the sole responsibility
of the rider. Please note that all content within this manual is subject to change or withdrawal
without notice. Pedibal makes every effort to ensure the accuracy of its documentation and
assumes no responsibility or liability for any errors or inaccuracies that may appear herein.
The product(s) has been verified on a voluntary basis. The product(s) satisfy the requirements of
the Certification Mark of ECM, in reference to the above listed standard(s). The above
Certification Mark can be affixed on the product(s) according to the ECM regulation about its
release and its use. Whereas the manufacturer is responsible for the certification of the
product(s) they are not expected to perform all the necessary activities before placing the
product(s) on the market. The Manufacturer is also responsible to maintain efficient internal
production control to ensure the product(s) are in compliance with the Certification.