Pg. 4
Pg. 4
Pg. 5
Pg. 5
Figure 1.
Figure 2.
3
3
Figure 3.
Figure 4.
Move the stem so that you can see directly down the hole (Figure 1). Insert
the 6 mm allen wrench, supplied in the kit, into the hole and tighten the screw
clockwise until the handlebars do not move separately from the front wheel
(Figure 3).
In order to get the bolt securely tighten you may need to use a pair of plyers for
leverage (Figure 4).
Position the handlebars to your comfort level and lock handlebars into place
by pushing the handle back down. If handlebars move up or down after
pushing handle down, you can tighten the screw indicated in figure 2 with a
5 mm allen wrench in your kit.