Peco 51031201, Operator'S Manual, Page: 10 / 24

I
2-14 Hose Installation
Slide one end of the hose P#(F0005) onto the inlet
P#(V1054). Secure the hose to the inlet with (1) hose
clamp P#(J1001) as shown in Figure 2-14a. Be sure to
leave at least 1” of the hose overlapping the clamp.
Slide the opposite end of the hose onto the deck drive
assembly boot P#(V1164) and secure with (1) hose
clamp P#(J1001) as shown in Figure 2-14b. Be sure to
leave at least 1” of the hose overlapping the clamp.
Figure 2-14a
Figure 2-14b
Boot
Hose
Clamp
Inlet
Hose
Clamp
10
2-13 Belt Guard Installation Cont...
Figure 2-13b
Figure 2-13a
Tabs
Belt Guard Tabs
PTO Deck Drive Slots for Tabs
Figure 2-13c
Assembled Belt Guard and PTO Deck Drive
Figure 2-13d
Belt Guard
Holes for Guard Stand-Offs
Belt Guard
Belt Guard Plate
Guard Stand-Offs