17
2-15 Weight Kit Installation
NOTE:
It is recommended that someone assist you in
the weight kit installation procedure.
For the 50” & 60” Decks - Use Left Weight Bracket
P#(B0962) and Right Weight Bracket P#(B0383RT).
Refer to Figure 2-15b.
For the 72” Deck - Attach the Left Weight Bracket
P#(B0962) and Right Weight Bracket P#(B0963) to the
front frame of the mower. Place each weight bracket
onto the frame tube and secure using (1) 3/8”-16 x 2-1/4”
x 1-3/4” U-Bolt P#(K1436) and (2) 3/8”-16 Ny-Flange
Lock nuts P#(K2038). Leave the hardware finger tight
so the position of the weight brackets can be adjusted
left or right if necessary. Refer to Figure 2-15a.
Place Left Weight Bracket P#(B0962) onto the frame
and secure using (1) 3/8”-16 x 2-1/4” x 1-3/4” U-Bolt
P#(K1436) and (2) 3/8”-16 Ny-Flange Locknuts
P#(K2038). Next, place Right Weight Bracket
P#(B0383RT) onto the front tubing, as shown in Figure
2-15b and secure using (2) 3/8”-16 x 3-1/2” HHCS and
(2) 3/8”-16 Ny-Flange Locknuts P#(K2038). Leave the
hardware finger tight so the brackets can be adjusted left
or right if necessary.
Using two people, lift the weight bars P#(B2220) into
position. Secure the weight bars to the left and right
weight brackets using (2) 1/2”-13 x 4-1/4” u-bolts
P#(K0331) and (4) 1/2”-13 Ny-Flange locknuts
P#(K2012).
NOTE:
Before tightening all of the
hardware, make sure the weight bars are centered
between the weight brackets.
(1) 3/8”-16 x 2-1/4” x 1-3/4”
U-Bolt
(2) 3/8”-16 Ny-Flange Locknuts
(2) 1/2”-13 U-Bolts
(4) 1/2”-13 Locknuts
Weight
Bars
Weight
Bracket
Weight
Bracket
(1) 3/8”-16 x 2-1/4” x 1-3/4”
U-Bolt
(2) 3/8”-16 Ny-Flange Locknuts
(1) 3/8”-16 x 2-1/4” x 1-3/4”
U-Bolt
(2) 3/8”-16 Ny-Flange Locknuts
(1) 3/8”-16 x 2-1/4” x 1-3/4”
U-Bolt
(2) 3/8”-16 Ny-Flange Locknuts
(1) 3/8”-16 x 2-1/4” x 1-3/4”
U-Bolt
(2) 3/8”-16 Ny-Flange Locknuts
Figure 2-15a
Figure 2-15b
Classic
50” & 60”
Decks
Classic
72” Deck
(2) 3/8”-16 x 3-1/2”
HHCS
(2) 3/8”-16 Ny-Flange Locknuts
