CMYK
SINGLE
HEX
c32 m25 y25 k85
90% black
#363636
RGB
54 54 54
INSTALLATION GUIDE
Installation Procedure
1.
Open the carton and make sure all the parts listed below
are present.
NOTE:
ADDITIONAL FIXINGS REQUIRED TO ALLOW INSTALLATION ON PLASTERBOARD WALLS
2.
Mark a desired height of the cabinet. Drill the required
holes and install the brackets.
NOTE:
NOTE: Please fully ensure the hanging hooks is connecting with the brackets.
Wall plugs supplied are only suitable for solid stone/brick
walls. Please ensure the screws are fully tight.
3.
electrical supply has been turned off. This cabinet is a class
1 product and requires an earth connection. It should be
installed in accordance with the latest IEE regulations.
1X
2X
Output Wires
DISTANCE
A
IS THE DISTANCE
BETWEEN THE HANGING HOOK
6.
Insert the shelfs.
Hang the Cabinet onto the wall. Activate the lights via the
sensor switch.
4.
5.
Insert the internal securing screw and attach the screw cap.
6X
7X
2X
1X
8X
A
B
DISTANCE
B
IS THE DISTANCE
BETWEEN THE FIXING HOLES
Wall screws
Wall plugs
