Peavey SP 2X Specifications Download Page 3

upon having a minimum of 3 dB of
amplifier headroom available.

Harmonic Distortion

Second and third harmonic distortions vs.
frequency are plotted in figures 3 and 4 for
two power levels. Ten percent (10%) of
rated input power and either one percent
(1%) of rated input power or one Watt,
whichever is greater. Distortion is read
from the graph as the difference between
the fundamental signal (frequency
response) and the desired harmonic. As
an example, a distortion curve that is
down 40 dB from the fundamental is
equivalent to 1% distortion.

Mounting

Warning:

This unit is not designed for

overhead suspension. SA

1 stand

adpater is included on the bottom for
stand mounting applications.

Architectural and Engineering
Specifications

The loudspeaker system shall have an
operating bandwidth of 53 Hz — 16 kHz.
The nominal output level shall be 98.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
shall be 500 Watts, maximum program
power of 1,000 Watts and a peak power
input of at least 2,000 Watts, with a
minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be
90 degrees in the horizontal plane and 
40 degrees in the vertical plane. The
outside dimensions shall be 33.25 inches
high by 21.00 inches wide by 22.75 inches
deep.  The weight shall be 85 pounds.
The loudspeaker system shall be a
Peavey model SP 2X.

This product is manufactured under U.S.
Patent 6,064,745.

3 + 2 YEAR LIMITED WARRANTY

NOTE:

For details, refer to the 

warranty statement. Copies of 
this statement may be obtained 
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.

20

50

100

200

500

1k

2k

5k

10k

20k

Frequency (Hz)

40

50

60

70

80

90

100

110

dB

SPL

(re

20

Pa)

Harmonic Distortion : 1% Rated Power

Figure 4

3rd Harmonic

2nd Harmonic

20

50

100

200

500

1k

2k

5k

10k

20k

Frequency (Hz)

50

60

70

80

90

100

110

120

dB

SPL

(re

20

Pa)

Harmonic Distortion : 10% Rated Power

Figure 3

3rd Harmonic

2nd Harmonic

Summary of Contents for SP 2X

Page 1: ...igh Frequency Section 124 8 dB SPL continuous 130 8 dB SPL peak Transducer complement Low Frequency Section 1x 15 in woofer vented 1508 8 HE BWX High Frequency Section 1x 875 in exit 51 mm voice coil compression driver on CD horn Rx22 on a CH 941 Box tuning frequency Low Frequency Section 53 Hz Harmonic distortion 1 rated power 2nd Harmonic 100 Hz 1 62 1 kHz 0 22 3rd Harmonic 100 Hz 0 52 1 kHz 0 6...

Page 2: ...This position may be preferred for some types of program material The response curve for each position is given in figure 1 Sound Guard III is the redesign of Peavey s proprietary circuit for high frequency driver protection for the new Rx22 compression driver This is an integral part of the crossover for the SP 2X The input signal is routed through the Sound Guard III circuit in both full range a...

Page 3: ... Watt The nominal impedance shall be 8 0 Ohms The maximum continuous power handling shall be 500 Watts maximum program power of 1 000 Watts and a peak power input of at least 2 000 Watts with a minimum amplifier headroom of 3 dB The nominal radiation geometry shall be 90 degrees in the horizontal plane and 40 degrees in the vertical plane The outside dimensions shall be 33 25 inches high by 21 00 ...

Page 4: ...UT Features and specifications subject to change without notice Peavey Electronics Corporation 711 A Street Meridian MS 39301 601 483 5365 FAX 601 486 1278 www peavey com 2001 Printed in the U S A 3 01 80304850 ...

Reviews: