®
SANPERA II
™
1
3
10
11
12
13
14
15
4
5
6
7
8
9
2
LOOPER CONTROLS
6. Rec/Play
You will spend hours with this! To record a loop
for playback simply start playing, when you want
to
START the loop, press this button and the amp
will begin recording the loop. When you want to
STOP recording, press this button again and the looper
STOP
STOP
will stop recording and automatically begin to play back.
7. Stop/Reset
To STOP a loop in process, press this button. To ERASE the currently
stored loop (recorded by pressing button 6), press and hold this button
for 3 seconds.
8. Main/AUX Indication LED
These LEDs indicate whether the pedals is in MAIN MODE
or
AUx
MODE. Depress the toe area of the expression pedal to switch between
modes. Out of the box
M
ain indicates Wah, Aux indicates Pitch Shift.
9. Expression Pedal
When active, this pedal controls a universal wah. To activate the wah
depress the toe area of the footswitch. When Pitch Shift is selected on the
amplifier, this pedal will control the pitch of the signal.
TIP: You can change amp
presets after you have recorded
your loop, allowing you to play
a totally different sound over top
of the loop!
Summary of Contents for Sanpera II
Page 9: ...A C B D E F G...
