Frequency response, 1 meter on-axis, swept-sine in anechoic Environment (-6 dB): 35 Hz - 116 Hz
Usable low frequency limit (-10 dB point): 32 Hz
Power Amp Rating, Total Power Output (@120 VAC line): 2,000 watts total peak available power,
Continuous Power: 1,000 watts total
Sound Pressure Level, 1 Watt, 1 meter in anechoic environment: 101 dB SPL (Both speakers driven with 1 watt)
Maximum Sound Pressure Level (1 meter): 130 dB SPL continuous, 133 dB SPL peak
Transducer Complement: Dual 15” Peavey® Low Rider™ 4 ohm woofers, 4” voice coil
Box Tuning Frequency: 36 Hz
Input Connections:
Two combo female XLR/ 1/4” phone jack providing balanced or unbalanced operation, and one 3.5 mm stereo
media jack.
Output Connections:
Two XLR Outputs, one Full Range Thru, electrically buffered with selectable option of Channel A input only, or
Ch. A and Ch. B mixed.
One High –Pass Output
Controls:
Ch. A and Ch. B Gain control knob
Ch. A and Ch. B Mic/Line gain select pushbutton
Ground Lift pushbutton
Electronic Crossover:
DSP based, with LCD display and Rotary Encoder Knob for selection of crossover and EQ presets.
Crossover Frequency Default: Set to 110 Hz
Alternate user selectable frequencies: 100 Hz and 120 Hz.
Low Pass slope: 24 dB/octave
High Pass Output slope: 24 dB/octave
Infrasonic Filter Slope: 36 dB/octave
Status Indicators: Front baffle LED is blue for power ON indication, and turns red to indicate DDT activation.
Rear panel LCD screen in Input Level mode, shows DDT activation by flashing “DDT” on the LCD screen, right
hand side. Signal level indicated by bar graph coming from left hand side of LCD.
DSP Section Specifications:
Latency: Approx. 2.7 msec
ADC/DAC Sampling Frequency: 96 kHz
Bit Depth: 24 bits for ADC/DAC, 32 bits for DSP calculations.
SPECIFICATIONS