Peavey RAGE 158 TRANSTUBE Series Operating Manual Download Page 19

Correct  Disposal  of  this  product.  This  marking  indicates  that  this 

product  should  not  be  disposed  with  other  house  hold  wastes 

throughout the EU. To prevent possible harm to the environment or 

human health from uncontrolled waste disposal, recycle it responsibly 

to promote the sustainable reuse of material resources. To return your 

used device, please use the return and collection systems, or contact 

the  retailer  where  the  product  was  purchased.  They  can  take  this 

product for environmental safe recycling.

Logo referenced in Directive 2002/96/EC Annex 

IV(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005

The bar is the symbol for marking of new waste and is applied 

only to equipment manufactured after 13 August 2005

Forma correcta de deshacerse de este producto. Esta marca indica que este producto 

no debe arrojarse junto con otros desperdicios domésticos en ningún lugar de la Unión 

Europea. Para evitar posibles daños al medio ambiente o a la salud humana debidos a 

desechos no controlados de desperdicios, recíclelo responsablemente para promover 

la  reutilización  sostenible  de  los  recursos  materiales.  Para  devolver  su  dispositivo 

usado,  utilice  los  sistemas  de  devolución  recolección,  o  contacte  con  el  vendedor 

minorista donde compró el producto. Ellos pueden llevar este producto al reciclado 

seguro para el medio ambiente.

Logotipo al que se hace referencia en la Directiva 2002/96/EC 

AnexoIV(OJ(L)37/38,13.02.03 y definido en EN 50419: 2005

La barra es el símbolo para marcar los nuevos desechos y se aplica 

solamente a equipamiento fabricado después del 13 de agosto de 2005

Recyclez correctement ce produit. Cette signalisation indique que ce produit ne 

doit pas être jeté avec les autres déchets domestiques dans les pays de l’UE. Pour 

éviter toute atteinte à l’environnement ou à la santé humaine par des décharges 

sauvages,  recyclez  ce  produit  de  manière  responsable  pour  encourager  la 

réutilisation durable des ressources matérielles. Pour retourner votre appareil usé, 

veuillez utiliser les systèmes de collecte et de retour, ou contactez le revendeur 

à qui vous avez acheté le produit. Il prendra en charge ce produit de manière à 

protéger l’environnement.

Logo documenté dans l’annexe de la Directive 2002/96/EC  

IV_(OJ(L)37/38,13.02.03 et défini par la norme EN 50419:2005

La barre est le symbole de signalisation des nouveaux déchets qui 

s’applique uniquement aux équipements fabriqués après le 13 août 2005

Tuotteen oikea hävittäminen. Tämä merkki ilmaisee, että tuotetta ei saa hävittää muun 

talousjätteen mukana EU:n alueella. Jotta estetään mahdolliset valvomattoman jätteiden 

hävittämisen haitat ympäristölle tai ihmisten terveydelle, kierrätä tuote vastuullisesti ja 

edistä materiaalien kestävää uudelleenkäyttöä. Voit palauttaa käytetyn laitteen käyttämällä 

keräysjärjestelmiä  tai  ottamalla  yhteyttä  jälleenmyyjään,  jolta  laite  ostettiin.  He  voivat 

toimittaa tuotteen ympäristön kannalta turvalliseen kierrätykseen.

Logo viitattu direktiivin 2002/96/EY liitteen  

IV(OJ(L)37/38,13.02.03 mukaisesti, määritelty standardissa EN 50419: 2005

Palkki on uuden jätteen merkintäsymboli ja sitä käytetään vain 13. elokuuta 

2005 jälkeen valmistetuissa laitteissa

Juiste  verwijdering  van  dit  product.  Deze  markering  geeft  aan  dat  dit  product 

nergens in de Europese Unie met ander huishoudelijk afval mag worden afgevoerd. 

Om  mogelijke  schade  aan  het  milieu  of  gezondheid  door  ongecontroleerde 

afvalverwijdering te voorkomen, recycle het op een verantwoorde wijze om het 

duurzame hergebruik van materiaalgrondstoffen te bevorderen. Om uw gebruikte 

apparaat in te leveren, kunt u gebruik maken van de inlever- en verzamelsystemen 

of contact opnemen met de verkoper waar het product is gekocht. Zij kunnen dit 

product innemen voor het milieuvriendelijk recycling.

Het logo waarnaar wordt verwezen in de bijlage van Richtlijn 2002/96/EG 

IV(OJ(L)37/38,13.02.03 en omschreven in EN 50419: 2005

De balk is het symbool voor het markeren van nieuw afval en wordt 

alleen toegepast op apparatuur dat is vervaardigd na 13 augustus 2005

正确处理此产品。此标志表明该产品在整个欧盟区内不应该与其他家居生
活废弃物一同处置。为防止因无控废弃物处置对环境或人类健康可能造成
的危害,请负责地回收并促进可重复使用的物质资源。要返还旧设备,请
使用退返收集系统,或联系购买此产品的零售商。他们会为环境安全回收
此产品。

标志参照

 2002/96/EC 

指令附录

 

IV(OJ(L)37/38,13.02.03 

 EN 50419: 2005 

定义

条码符号标示新废弃物,仅适用于

 2005 

 8 

 13 

日后生产的设备

Entsorgen  Sie  dieses  Produkt  umweltgerecht.  Diese  Kennzeichnung  bedeutet, 

dass das Produkt innerhalb der EU nicht mit dem Hausmüll entsorgt werden darf. 

Zur  Vermeidung  von  Umwelt-  und  Gesundheitsschäden  durch  unkontrollierte 

Entsorgung recyceln Sie das Gerät bitte. Geben Sie das Gerät an einer Sammelstelle 

für Elektroaltgeräte ab oder wenden Sie sich an Ihren Fachhändler.

Logo eingetragen in Richtlinie 2002/96/EC AnhangI 

IV_(OJ(L)37/38, 13.02.03 und definiert in EN 50419: 2005

Der Balken ist das Symbol zur Kennzeichnung neuen Abfalls und wird nur 

auf Geräten angebracht, die nach dem 13. August 2005 gefertigt wurden

Korrekt  bortskaffande  av  denna  produkt.  Denna  märkning  betyder  att 

produkten  inte  skall  bortskaffas  tillsammans  med  annat  hushållsavfall  i 

hela  EU.  För  att  förhindra  eventuella  skador  för  miljön  eller  människors 

hälsa från okontrollerat bortskaffande av avfall, återvinn det ansvarsfullt för 

att främja hållbar återanvändning av materiella resurser. För att returnera 

din  använda  enhet,  använd  återanvändnings-  och  uppsamlingssystem, 

eller kontakta den återförsäljare där produkten köptes. De kan ta hand om 

denna produkt för miljösäker återvinning.

Logotyp som hänvisas till i direktiv 2002/96/EG bilaga 

IV(OJ(L)37/38,13.02.03 och definieras i EN 50419: 2005

Stapeln är symbolen för märkning av nytt avfall och är endast 

tillämplig på utrustning som tillverkats efter 13 augusti, 2005

Corretto smaltimento di questo prodotto. Questo simbolo indica che questo prodotto 

non  deve  essere  smaltito  insieme  ad  altri  rifiuti  domestici  in  tutta  Europa.  Per 

prevenire possibili danni all’ambiente o alla salute umana dovuti allo smaltimento non 

regolamentato dei rifiuti, è necessario riciclarlo responsabilmente al fine di promuovere 

il riutilizzo sostenibile delle risorse materiali. Per restituire il dispositivo usato, utilizzare 

i sistemi di restituzione e raccolta o contattare il rivenditore presso il quale il prodotto è 

stato acquistato. Quest’ultimo può occuparsi del riciclaggio ambientale sicuro di questo 

prodotto.

Simbolo presente nell’allegato IV_(OJ(L)37/38,13.02.03 della direttiva 2002/96/

CE e definito nello standard EN 50419: 2005

La barra è il simbolo indicante un nuovo rifiuto ed è applicata esclusivamente ad 

apparecchiature prodotte successivamente al 13 agosto 2005

Summary of Contents for RAGE 158 TRANSTUBE Series













































Reviews: