Description
The Peavey® PVs 15 Sub is a compact vented powered subwoofer system utilizing a 15” heavy-duty woofer, cou-
pled to a DSP controlled power amplifier with 1,000 watts peak available power. The full-length black perforated
steel grille provides protection and a professional appearance, along with the sturdy steel handles for moving the
Sub. Large heavy-duty locking casters on the rear provide for easy transport on suitable surfaces.
Internal line-level crossover with two high-pass outputs, and one full-range thru output. Peavey’s new switchable
bass enhancer for extra bass punch from low frequency program material is incorporated for maximum versatil-
ity.
A threaded pole-mount system provides a sturdy and stable platform to mount a suitably equipped speaker sys-
tem above the sub woofer. The PA™ two-way powered speaker series are an excellent partner for the PVs 15 Sub.
The PVs 15 Sub speaker system power amplifier providing the power is a low-distortion reliable fan-cooled unit
providing a total of 1,000W peak available power for the system. The power supply for the power amp is a switch
mode type for low weight and high efficiency. The amplifier features DSP processing for the crossover functions,
compression and limiting, and the low-frequency EQ.
Input is via a combo female XLR and 1/4” TRS phone jack with balanced input to the preamp/EQ electronics,
and a gain control.
A pair of High-Pass Outputs in the form of male XLR jacks provides a buffered and balanced output signal for
satellite speakers to carry the high range of the music. A Full-Range Thru output has a male XLR connector.
These outputs allow linking of additional speaker systems, or feed of the signal to other devices, etc.
Features
•
Vented bass powered subwoofer enclosure
•
1,000 watts peak available power
•
15” Heavy Duty Woofer
•
Power Amp has forced air cooling for maximum reliability
•
Internal line level low-pass/high-pass crossover network
•
DSP based crossover, compression, limiting and EQ.
•
Bass Enhance button for increased bass impact
•
XLR/one quarter inch combo jack input
•
Two High-Pass XLR outputs, One Full Range Thru XLR output
•
Polarity Switch for polarity reversal of subwoofer
•
Ground Lift for lifting cable shield from ground
•
Full-coverage heavy-duty perforated steel grill
•
Steel handles
•
Large heavy-duty locking casters with damped bearings
•
Compact dimensions for a 15” woofer based sub
•
Threaded Pole Mount with speaker pole included
Applications
The Peavey PVs 15 Sub has a variety of applications such as extending the bass performance of smaller full-range
speaker systems for sound reinforcement, public address, side fill system, karaoke or musical playback.
A typical signal source for the line-level inputs of the Peavey PVs 15 Sub would be a sound reinforcement mixing
console (mixer) or the output from a CD player, MP3 player or tape deck. The high-pass filtered signal from the
PVs 15 Sub would then be sent to a full-range powered speaker system, easing the burden of deep bass from this
speaker system.
ENGLISH