Peavey PV 1500 Specifications Download Page 2

15

Specifications

PV

®

900

PV

®

1500

PV

®

2600

RATED OUTPUT POWER:

Stereo mode (EIA both channels driven)

4 Ohms 

EIA

, 1 kHz, 1% THD

300 W RMS/chan

500 W RMS/chan

900 W RMS/chan

8 Ohms 

EIA

, 1 kHz, 1% THD

180 W RMS/chan

300 W RMS/chan

550 W RMS/chan

Bridge mode, mono

8 Ohms 

EIA

, 1 kHz, 1% THD

600 W RMS 

1000 W RMS

1800 W RMS

HUM & NOISE:

Stereo mode, below rated output power, 4 ohms

100 dB, unweighted

100 dB, unweighted

100 dB, unweighted

DISTORTION: 

SMPTE-IM

Less than 0.01%

Less than 0.01%

Less than 0.01%

INPUT SENSITIVITY & IMPEDANCE:

@ rated output power, 4 ohms

0.87 V RMS(-1.2 dBV)

1.12 V RMS(+1dBV)

1.5 V RMS(+3.5 dBV)

Balanced, TRS 1/4” phone jack

10 K Ohms per leg

10 K Ohms per leg

10 K Ohms per leg

Balanced, XLR (pin 2 positive)

10 K Ohms per leg

10 K Ohms per leg

10 K Ohms per leg

Overall system gain per channel

40X (+32 dB)

40X (+32 dB)

40X (+32 dB)

DISTORTION: 

(THD, typical value)

Stereo mode, both channels driven, 4 Ohms

20 Hz to 20 kHz, 10 dB below rated power

Less than 0.03%

Less than 0.03%

Less than 0.03%

20 Hz to 2 kHz, at full rated power

Less than 0.03%

Less than 0.03%

Less than 0.03%

FREQUENCY RESPONSE:

Stereo mode, both channels driven

+0, -1 dB @ 1 W RMS, 4 ohms

20 Hz to 20 kHz

20 Hz to 20 kHz

20 Hz to 20 kHz

+0, -3 dB @ rated output, 4 ohms

5 Hz to 50 kHz

5 Hz to 50 kHz

5 Hz to 50 kHz

DAMPING FACTOR:

(Typical value)

Stereo mode, both channels driven

8 Ohms, 1 kHz

Greater than 

300

Greater than 

300

Greater than 

300

POWER CONSUMPTION:

Stereo mode, both channels driven

@ 1/8 rated output power, 4 Ohms

5.0 ARMS @ 120 VAC

7.0 ARMS @ 120 VAC

7.0 ARMS @ 120 VAC

TOPOLOGY:

Class AB

Class AB

Class H

WEIGHT:

40 lbs (18.2 kg)

45 lbs (20.5 kg)

49 lbs (22.3 kg)

FEATURE SET:

All Models (++ indicates each channel)

DDT

COMPR+:

Automatic, switchable with LED indicator

COOLING SYSTEM:

Two-speed DC fan, air flow back to front

LOW CUT +:

-3 dB @ 40 Hz, 12 dB per octave

CRO+:

150 Hz, 4-pole Linkwitz-Riley approximation

+:

Electronic balanced; Barrier Strip, XLR, TRS 1/4" (6.3 mm)

CROSSOVER O+:

Low/Thru and High, TS 1/4" (6.3 mm)

AMPLIFIER OUTPUTS:

Speakons for Chan A, Chan B and Bridge; Binding Posts

LED INDI+:

Red, DDT/clipping; Yellow, signal; Green, power

AMP PROTECTION:

Full short circuit, open circuit; over-temp thermal; RF; stable into any load

LOAD PROTECTION:

Turn on/off muting, DC (triac crowbar), low-cut filter

MAINS VOLTAGES AVAILABLE

100, 120, 230, 240 VAC, 50-60 Hz

DIMENSIONS:

Height: 3.5” (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)

Specifications subject to change without notice

Reviews: