Peavey PROCOMM Operating Manual Download Page 5 | Manualshive

Page: 5 / 13

Peavey PROCOMM Operating Manual Download Page 5

Controls and Indicators

1. Capsule Module: The anti-roll grille protects detachable microphone capsule and the internal foam prevents

breathing, wind and POP noises.

2. Fixed Ring

3. Battery Compartment: Accommodates one 18500 rechargeable battery.

4. Housing: Protects transmitter PCB, battery compartment and battery.

5. Ascertain the power is turn “ON” to see battery status.



Normal Battery: LEDs indicates battery meters.



Weak Battery: Red LED is lit. Recharge or insert a new recharged battery.



No LEDs light: battery is completely drained or polarity inserted incorrectly.

6. Power On/Off Switch: Always power off the transmitter to conserve battery life when not in use.

7. CCS Infrared (IR) Sync Port: Receives signals from receiver to synchronize frequencies automatically.

8. Battery Charging Contact: Align contacts during charging.

9. Color Coded Protection Cap: Protects against accidental power on/off. Available in different colors for channel

differentiation.

«
...
3
4
5
6
7
...
»

Summary of Contents for PROCOMM














Reviews:

No comments