Chapter 6 - Setting up the unit using the on screen menus
26
Version 2.0.0.0
July 7, 2017
.
Introduction
Once you have installed the xControl LCD and checked that it is functioning correctly, it is
ready to be used. You can, however, also use the set up screens to specify further configuration
options.
Note:
Once you have changed a setting, you must navigate to the
Save and Exit
screen, select
Save and Exit
, then press
Enter
.
Displaying the setup menu
In order to display the set up menu, you must specify a valid setup passcode. The default
passcode is 517.
To display the setup menu
1.
Press
Level Down
+
Level Up
+
Zone Up
at the same time.
The passcode screen is displayed.
2.
Press the
Source
buttons to select a digit, then press
Level Up
or
Level Down
to change
its value.
3.
Press
Enter
.
The
Edit Setup Passcode
screen is displayed. You can use the
Zone Up
and
Zone Down
buttons to move between the setup screens.
Setting the unit base code
In order for a project to communicate with the xControl LCD, it must be assigned a unique
base code.
To set the unit base code
1.
Press the
Zone Up
button or
Zone Down
button repeatedly until the
Set Base Code
screen is displayed.
2.
Press the
Level Up
and
Level Down
buttons to select the base code.
3.
Press
Enter
.
4.
Press the
Zone Up
button or
Zone Down
button repeatedly until the
Save and Exit
screen
is displayed.
5.
Select
Save and Exit
.
6.
Press
Enter
.
Setting the inactivity timer
The inactivity timer automatically displays the logo screen after a specified time has elapsed
since a button was pressed.
To set the inactivity timer
1.
Press the
Zone Up
button or
Zone Down
button repeatedly until the
Set Inactivity Timer
screen
is displayed.
2.
Press the
Source
buttons to select a digit, then press
Level Up
or
Level Down
to change
its value.
