Peavey Electronics Corporation
5022 Hartley Peavey Drive Meridian, MS 39305
Question 3.
No XLR output signal?
A: Check that the audio route has been assigned to the
corresponding channel via the Dante Controller software.
B: Confirm the audio signal path is correctly routed and being
transmitted and received at all devices.
6. ATTENTION
To ensure correct operation and safety, please pay attention
to the following items during installation, use and
maintenance.
1. In order to avoid electric shock, do not open the device
shell. There are no parts that can be repaired inside the device.
Do not dismantle or attempt to repair the device without the
written consent of Peavey Commercial Audio. When required
for maintenance purposes, please contact your authorized
technical support technician or Peavey Commercial Audio.
2. This device must not be exposed to water, operated in
environments causing condensation or where dust and dirt
may ingress the device
3. Do not spill or use any corrosive cleaning chemicals or
liquids on or near the equipment. Should the face plate
become dirty use only a microfiber cloth, dampen with water
followed by a clean dry cloth to remove any remaining
moister on the devices front panel.
7. Packing list
Device
Screws
Micro driver
Quick guide
1
4
1
1
8. WARRANTY
Warranty policy terms and conditions
：
The warranty period for this product is 2 years from the date
of initial purchase and serial number registration with the
original authorized reseller or Peavey Commercial Audio.
Product performance failure caused by non-human damage
during the warranty period shall be repaired or replaced at no
charge.
The following cases (including but not limited to) are not
covered within the policy and scope of the manufactures
warranty:
1. Non warranty covered devices due to missing and valid
invoices or non-authorized sale of such product including
initial purchase dates having exceeded the warranty service
expiration period of 2 years.
2. Failure to use, maintain and manage the device in
accordance with the requirements as outlined in this quick
guide and the associated product specification sheet listed
parameters.
3. Damage caused by force majeure, such as fire, flood,
lightning including unregulated and unconditioned power.
4. Damage caused by negligence, improper installation
procedures, non-supported operating environments and
temperatures including excessive force applied to connectors
and device control interfaces.
5. Damage caused by unauthorized repair and unauthorized
service.
WARRANTY CARD
Date of production
：
Product model
：
sWALL 2x2
Serial number
：
