Peavey Classic 20 MH, Operating Manual

Page: 27 / 30

Classic 20 MH
®
All-Tube Guitar Amplifier SPECIFICATIONS
Rated Power : 20 W(rms) into 8 or 16Ω
Power Consumption
: (Domestic) 90
W, 50/60 Hz, 120 VAC
Tube Complement : 2 x EL84, 3 x
12AX7/ECC83
Dimensions (H x W x D)
: 7.25" x
14.00" x 7.75" / 185mm x 356mm x
197mm (height includes feet and handle)
Weight :17 lbs / 8kg
Preamp Specifications
Preamp Input :
Impedance: Very High-Z, 1MΩ
Effects Send :
Low Impedance : High-Z, 22kΩ
or greater
Nominal Output Level : 0 dBV, 1.0
V(rms)
Effects Return :
Impedance : High-Z, 100kΩ
Designed Input Level: 0 dBV, 1.0
V(rms)
Equalization:
Custom Low, Mid, & High passive EQ
Remote Footswitch(s): (included)
Special 2-button unit with LED
indicators (#00579720)
One footswitch for channel selection
and boost functions.
A second footswitch can be used for
switching reverb and effects loop on
and off.
Other Misc Specifications
Signal to Noise Ratio:
Better than 74dB on all models
(compared to full power and dependent
on preamp settings)
MSDI Output:
Low Impedance:
600Ω - Quasi-
Balanced
Output Level: Dependent on
controls but -12dBu (+/-3dBu) at full
power on all models
USB Output:
Output Level:
Dependent on
controls but -6dB (+/-3dB) at full power
on all models
Power attenuator:
Three setting switch for 100%, 25%
and 5% of rated power. (20W, 5W and
1W respectively.)
Headphone Output:
Stereo mini-jack with filtered output
for driving stereo headphones, 16Ω -
50Ω impedance per channel.
*Features and specifications
subject to change without notice.