Loudspeaker System Specifications
30
Once they connect, the primary speaker will be the Left channel
and the secondary speaker will be the Right channel. The
Left/Right signals can be swapped within the app.
Primary
Secondary
Fig. 41
Fig. 42
In order for this to work well, the Secondary speaker must be in Bluetooth®
range of the Primary speaker, and in order to have a good clean connection, it
would be wise to make sure that the Secondary speaker is well within the range
of the Primary, and that there are no metal walls, or other RF shielding structures
between the two speakers.
To add Bluetooth® streaming:
On the primary (Left)
PVX™p speaker, turn Streaming from "Off" to
"On".
On your device, make a Bluetooth® connection to the
PVX™p
speaker.
The volume of the Bluetooth® signal will be controlled by the CH3
Level controls on each
PVX™p speaker (independently).
To add App control:
On the primary
PVX™p speaker, turn App control from "Off to On".
The App should connect to and control both linked
PVX™p
speakers.
Auto Link
If it is desired that the
PVX™p speakers link all of the time as part of a
permanent setup, the two speakers can be set to automatically link every time
they are turned on.
On each
PVX™p speaker (Primary and Secondary), navigate to the
"Config" screen. See the Config Menu section below this section.
Change the "Auto Link" setting from "Off" to "On".
