2
5
ANT C+D
AUDIO OUT
MIX
DC INPUT
12-18V
A
BALANCED
B
BALANCED
C
BALANCED
D
BALANCED
ANT A+B
Functions of LCD Screen
Replacement of
PILOT
5
2
1. Frequency Group/Frequency
2. Battery Life Indication
3. RF Signal Strength Indication
4. AF Signal Strength Indication
5. Digital Pilot Tone Indication
6. Working Status of Receiver and
Ⅰ
Ⅱ
7. SQL Indication
When the transmitter is at low battery, the receiver will display “LOWBAT” and
then be muted. Please replace the transmitter's batteries asap.
Press “IR” button on front panel, receiver and transmitter starts infrared data
synchronization. Please be aware that synchronize one transmitter at one time. If
two transmitters synchronize with the receiver at the same time. It turns out the
two transmitters have the same frequency and hence couldn't work.
Latch the clip of bodypack transmitter on belt. Or thread guitar belt into the
clip of bodypack transmitter. As diagram shows.
If the equipment is not used for a long time, please take out the batteries. In
case the liquidity inside batteries may leak out and damage internal circuit.
The estimated battery life of the two alkaline batteries is about 8 hours. When
the transmitter flashes with red light, please replace the batteries asap. As
diagram above shows.
For a better effect, please push the bodypack transmitter down until clip's
pedestal is very close to belt.
System
Connection Method (Diagram 3)
(Diagram 3)
