Pearpoint Flexitrax P550c, Operation Manual

Page: 110 / 285

P550c Operation Manual
5 System setup
www.pearpoint.com | 110
Equipment settings
This menu is shown automatically when you power up a system (see page 135) except for the first time
when the Set-up Wizard is shown (see page 94 ).
Note : If the Equipment versions item shows in red, the P550c controller has a newer version of software
for one of system components than is currently installed on that component.

Drum type: If the drum is powered up, the P550c controller will automatically display whether you have a
powered or manual drum connected.

Tractor type: If the drum is switched on and power is reaching the tractor, the P550c controller will
automatically display whether you have a steerable or non-steerable tractor connected.

Tractor wheel size: Enter the wheel size correctly to ensure that distances are measured correctly.
Caution: Setting the wrong wheels will affect drum speed when retrieving and may cause the crawler to
topple. Additional wear and tear may also be caused to drum, tractor, or both.

Camera type : If the drum is switched on and power is reaching the camera, the P550c controller will
automatically display the camera type connected.

Powered elevator : If the drum is switched on and power is reaching the tractor, the P550c controller will
automatically display whether you have a powered elevator connected.

Lighthead : If the drum is switched on and power is reaching the camera, the P550c controller will
automatically display whether a lighthead is detected or not.