Self priming jet cast iron pumps
JCP-JSP
INSTALLATION AND OPERATING INSTRUCTIONS
Before installation, you should carefully read
this manual, and pay attention to safety
cautions and instructions in this manual.
Our factory is neither responsible for nor is
reliable for paying compensation for personal
injury, pump damage and other property
losses caused by violation of safety cautions.
1. APPLICATIONS
1) It is applicable to household water supply, equipment sup-
port, well water lifting, pipeline pressurization, garden watering,
vegetable greenhouse watering, fish farming and poultry
raising, etc.
2) Transfer clean water and other non-corrosive liquids with
low viscosity; do not transport inflammable, explosive, gasified
liquids and liquids containing solid particles or fibers. The PH
value should be within 6.5-8.5.
Remark:
This series of pump could be transformed into automatic water
pump, which is realized through external automatic plant that
is composed of pressure switch, pressure tank, etc. Function
features of the automatic pump are as follows: when the power
is on, turn on the water tap and the pump will start working
automatically; when the water tap is turned off, the pump will
stop working automatically. If a water tower is used along with
the automatic pump, connect to the upper limit switch and the
pump will start or stop working automatically with water level
in the water tower.
2. MODEL DESCRIPTION
3. TECHNICAL DATA
Max. flow: 90Umin
Max. head: 1 OOm
Output power: 0.3-2.2kW
Max. Suction: 9m
Insulation grade:IP44
Protection grade:F
Max. ambient tempe40
Max. liquid tempe40
4. IMPLEMENTATION STANDARDS
IEC/EN 60335-1 Household and similar electrical appliances-
-safety Part1: General requirements.
IEC/EN 60335-2-41 Household and similar electrical
appliances--safety Part2-41: Particular requirements for pump.
2006/95/EC Low voltage directive
PEP
05
A 16 S
Hertz
5=50hz, 6=60Hz
Features
S=Standard
Series Peripheral Pump
Phase
1=Single phase, 3=Three phase
Voltage
A=115V, C=230V, F=110/220V
HPx10
1. To ensure normal and
safety operation of the
electric pump, read manual
carefuly before use.
3. Do not touch the electric
pump while working; do not
wash, swim near working
area or let livestock into the
water to avoid accidents.
2. The electric pump should
have reliable grounding to
prevent short circuit; for
safety, leakage protection
switch should be equipped
and be careful no to wet the
power plug; socket should be
connected in damp - proof
area.
Manual
1
0
0
1
ON
OFF
5. SAFETY PRECAUTIONS
