Bass Drum Lug
Recommended location
Fig.1
PEARL BASS DRUM MOUNT
CYMBAL HOLDER
CHB-830
Congratulations on your purchase!
To get optimum performance of your BASS DRUM MOUNT CYMBAL HOLDER,
please read this Instruction Manual before use.
Instruction Manual
How to Mount the Bracket to the Drum Shell.
To mount the Cymbal Holder Bracket to your Bass Drum
shell requires that two 8.5mm holes are drilled into the
drum shell. Care should be taken to ensure the Bracket
location is firm before the installation process begins. For
general applications using a Pearl Bass Drum the
recommended location is as shown in Fig.1. A custom
location is possible and may be desired depending on the
drum brand used, the diameter of the Bass Drum and
cymbal. Important note: Double check the location of the
Bracket before drilling into the shell.
To begin cut out the Hole Position Template at the end of
this manual and set aside. Next remove batter side bass
drum hoop and head.
To install on a Pearl Bass Drum in the recommended
location remove the Bass Drum Lug as shown in (Fig.1)
using a Phillips head screwdriver. Place the template on
the drum and align the edge of the template with the edge
of the drum matching the Bass Drum Lug holes of the shell
to lug-holes drawn on the template. Then secure template
to the shell using a light-tack removable tape. Drill the
bracket holes vertically straight into the Bass Drum based
on the template using an 8.5mm wood drill bit. Next install
the Bracket to the shell (See Installing the Bracket).
For custom Bracket locations or use with other brands of
drums, use the template supplied to set the desired
location. For this use the Bass Drum Lug guide may not be
necessary. Secure the template to the shell and drill the
holes using the previous method described.
<< Installation of the Cymbal Holder Bracket to the Bass Drum >>
*If the Bracket has been previously installed, please proceed to the Assembling the Cymbal Holder section.
For best results, installation should be done by a qualified
technician. Pearl cannot be held responsible for damages of
properties or injuries sustained during the installation process
by any individual.
CAUTION
