Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 4
Fig. 6
Assemblying the Base
(from Flat Base to Tripod Base)
Loosen the Wing Bolt and the Key bolt of the base, then,
slide the legs off from the Base Pipe (Fig.1).
Wing Bolt
Base Pipe
Trident Bracket
Tuning Key
Key Bolt
Wing Bolt
Wing Bolt
Base Pipe
Base Pipe
Trident Bracket
Trident Bracket
Tuning Key
Tuning Key
Key Bolt
Key Bolt
Wing Bolt
Base Pipe
Trident Bracket
Tuning Key
Key Bolt
Assemblying the Base
(from Tripod Base to Flat Base)
Loosen the Wing Bolt and the Key bolt of the base, then,
slide the legs off from the Base Pipe (Fig.4).
Turn the Base Assembly over from Flat Base to Tripod
Base, and change the Wing Bolt and the Key Bolt so that
the Key Bolt is always at the bottom (Fig.2).
Turn the Base Assembly over from Tripod Base to Flat
Base, and change the Wing Bolt and the Key Bolt so that
the Key Bolt is always at the bottom (Fig.5).
Spread the legs and insert the Base Pipe. Make sure that
the bottom of the pipe and the Trident Bracket are set flush,
and tighten the Key Bolt and the Wing Bolt (Fig.3).
Spread the legs and insert the Base Pipe. Make sure that
the bottom of the pipe and the Trident Bracket are set flush,
and tighten the Key Bolt and the Wing Bolt (Fig.6).
Caution
Support the Base Pipe with one hand to prevent the stand from
falling.
Caution
Support the Base Pipe with one hand to prevent the stand from
falling.
