Pearl Abrasive PA20HSP, Owner'S/Operator'S Manual

Page: 4 / 40

4
Saw Features
The PA20HSP Series Concrete Saw is designed for wet or dry, high production flat and general industrial application
sawing. The heavy duty steel, one piece box frame is precision jig welded and reinforced. This precisely reinforced steel
construction with balanced weight distribution and ergonomic handlebars assures straight and accurate cutting as well
as ease of operations preventing fatigue. The 4-cycle air cooled engine is located for easy access and maintenance.
Each solid rubber wheel is mounted on an axle for years of reliable use. The rear axle is rigid, while the front axle pivots
causing the blade to be lowered to the desired cutting depth. The positive screw feed provides precision control of the
raising and lowering of the blade. The positive screw feed control wheel and all controls are located for easy access and
visibility. The following table shows the available models and the features that differentiate them.
PA20HSP Series Concrete Saw
Engine The PA2013HSP features a Honda ™ GX390 13 hp engine. The PA2013HE features a Honda GX390 with electric start. The PA2020
HSP features a Honda™ GX620 20 hp engine with electric start and key ignition switch and 20” blade guard.
Model
Engine/Blade Capacity
Additional Features
Honda GX390 13 hp
20” blade guard
PA2013 HSP
cyclone air filter, tach/
hourmeter
PA2020 HSP
Honda GX620 20 hp
20” blade guard
electric starter, tach/
hourmeter, centrifugal
water pump (optional)
Honda GX390 13 hp
20” blade guard
PA2013 HE
electric starter, tach/
hourmeter, centrifugal
water pump (optional)
Other important messages that are designed to help prevent damage to your PA20HSP Series concrete saw, other property, or the
environment are preceded by the word notice.
Your PA20HSP Series concrete saw or other property could be damaged if you don’t follow instructions.
Safety labels are located according to the chart below and the parts list starting on page 15. The labels contain important safety
information. Please read them carefully. These labels are considered a permanent part of your saw. If a label comes off or becomes
hard to read, contact PEARL or your dealer for replacement.
damage prevention messages
safety label locations
notice
Always use approved respiratory protection.
Respiratory Protection!
Always use approved hearing protection.
Hearing Protection!
Item Location Description Part #
C6 Top of Belt Guard Spark Plug Caution Label PA55579
C7 Front of Belt Guard Belt Tension Caution Label PA55583
C8 Top of Shaft & Belt Guard Guards in Place Caution Label PA55587
D15 Top of Blade Guard Lift Guard Caution Label PA55586
G13 Top of Console Tower Central Control Panel PA56749
G14 Back of Console Tower Water On/Off PA54404
G15 Back of Console Tower Engage PA54405
G16 Back of Console Tower Disengage PA54406
G17 Back of Console Tower Engine Stop PA56601
L19 Top of Gas Tank Hot Surface Caution Label PA55578
L20 Top of Gas Tank Refueling Warning Label PA55580
L21 Front of Gas Tank California Danger Label PA55581
L22 Top of Gas Tank Lethal Exhaust Danger Label PA55582
M7 Front Edge of Frame Hands and Feet Caution Label PA55585
O4 Center of Handlebar Handle Lifting Warning Label PA56627