Peaq PPA500, User Manual

Page: 34 / 146

ENGLISH 33
Specifications
DISPOSAL
The crossed-out wheeled bin logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Electric and electronic equip-
ment may contain dangerous and hazardous
substances. Do not dispose of this appli-
ance as unsorted municipal waste. Return it
to a designated collection point for the recy-
cling of WEEE. By doing so, you will help to
conserve resources and protect the environ-
ment. Contact your retailer or local authori-
ties for more information.
Rated voltage: AC 230 V~, 50 Hz
Power consumption: 130 W
Power consumption standby:
< 1 W
Power output:
Frequency response:
180 W RMS
( 20W X 2 + 25W X 2 + 90W, 2.2.1 system)
L/R CH (60 Hz - 20 kHz at +1 / -2 dB)
Sensitivity: L/R: 600 mV
Overload source e.m.f.: > 2 V
Separation: > 50 dB
S/N: 60 dB
Remote Control: > 7m
Dimensions (W x H x D): 166 (W) x 202 (H) x 400 (L) mm
Weight: 6.25 kg
Operating/ambient temperature: -10 °C to +40 ˚C
iPod / iPhone / iPad
“Made for iPod”, ”Made for iPhone” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
specifically to iPod, iPhone or iPad respec-
tively and has been certified by the devel-
oper to meet Apple performance standards.
Apple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards. Please note that
the use of this accessory with iPod, iPhone
or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and oth-
er countries.
INTENDED USE
This appliance is intended for recieving and
playing audio and video signals. Only use
according to these instructions. Improper
use is dangerous and will void any warranty
claim. Observe the safety instructions.
The rating label is located at the back of the appliance.