102
8.3 UPGRADE
This function can be used to store and update satellite data,
Also can be used to upgrade main program of the meter.
8.3.1 Satellite information update
Connect a USB disk to the meter first, then you can enter the
UPGRADE
function. The following picture will be displayed.
1)
Press the <Blue(Find)> button to backup the satellite information,
satellite list, channel data and so on.
2)
Press the <Red(0/22K)> button to display the firmware in the hard
drive and press OK button to upgrade the firmware .
3)
Press the <Green(H/V)> button to display the channel data in the
hard drive and press OK button to upgrade the channel data.
4)
Press the <Yellow(Spectrum)> button to display the all data
including the firmware and channel data.
