2. Introduction
* This fixed voltage switching mode power supply is designed with
high RFI stability especially for DC operated radio equipment. It is
also suitable for a variety of applications that need a clean DC
source.
* The concealed trimmer allows fine tuning of output voltage range
of 10 ~ 15V.
* Constant current circuitry is used for overload, short circuit and
over temperature protection. Output voltage and current would
drop to a safety value when any of the faults occur and the DC
output ON indicator will turn off. This power supply also has Over
Voltage Protection to prevent your connected equipment from
damage by abnormal high output voltage.
* Please read through this manual and pay special attention to the
caution and safety precautions.
* Keep this manual in an easy to find place for future reference.
Cautions!
DO NOT
use this power supply for high inductive load such as
solenoid or motorized equipment because of the inductive kick back
from the output may damage the power supply.
DO NOT
operate power supply immediately with a newly replaced
fuse before the fault has been found and rectified. Make sure to use
the same rating and type as the original fuse.
-12-
