7
Setting up the unit
Do not install or operate the unit in a damp or dusty
environment.
Do not expose the appliance to direct sunlight.
When setting up, ensure sufficient air circulation to cool the
internal circuits, never cover ventilation slots.
Do not operate the unit in the vicinity of devices with high
electromagnetic radiation.
Do not exceed maximum permissible output values (do not
connect switching power supply to loads with higher input
currents than the maximum permissible output current of the
switching power supply.
Do not connect the power supply unit to loads with high
inrush currents.
Connection and operation
1. Before connecting the mains cable to a mains socket, make
sure that the available mains voltage matches
the
mains voltage 110 - 240 V AC
required for the switching
power supply (see voltage information on the back of the unit).
2.Switch on the
switching power supply and set the required
output voltage for the external device on the switching power
supply.
3. Connect the external device to the switching power supply.
Connect the
positive input of the external device to the
positive output (+red) and the negative input of the external
device to the negative output (-black) of the switching power
supply.
5. After work
has been completed, first switch off the
external device and then the switching power supply.
