17
6. Performing Measurement
General:
1.
Turn off the machine using the ON button (2).
2.
Press the "FAST / SLOW" button (3) to switch the desired term
evaluation.
3.
Press the "MAX / MIN" button (4) to switch to the maximum value
mode. The meter is now renewed only if the current measured
value exceeds the highest previous reading.
4.
Press the "MAX / MIN" button (4) again to switch to the minimum
value mode. The meter is now renewed only if the current
measured value is less than the lowest previous reading
5.
Press the button (4) again to switch back to the normal
measurement mode.
Automatic Power Off
If the device is not used, it automatically turns off after 10 minutes.
For continuous measurements, the automatic shutdown can be
disabled:
1.
Turn off the unit (if necessary) with the ON button (2)
2.
Turn on the unit again with the ON button (2) and hold the button
for about 5 seconds while the device starts
3.
The system displays the
symbol in the display for a second
4.
Release the ON button (2) and turn the power off again
5.
The next time the device is switched on, the
icon appears in
the display
