1. Safety Precautions
This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) amended by 2004/22/EC (CE-Marking). Pollution
degree 2.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the following
safety precautions must be observed.
Damages resulting from failure to observe the following safety
precautions are exempt from any legal claims whatever.
* Do not operate the meter before the cabinet has been closed
and screwed safely.
* Check test leads and probes for faulty insulation or bare wires
before connection to the equipment.
* Comply with the warning labels and other info on the
equipment.
* Keep the equipment dry.
* Use extreme caution when the laser beam is turned ON.
* Don’t let the beam enter your eye, another person’s eye or the
eye of an animal.
* Be careful to let the beam on a reflective surface strike your eye
* Do not allow the laser light beam impinge on any gas which can
explode
* Do not let the beam on any body.
* Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* To avoid damage or burns, do not make temperature
measurement in microwaves ovens.
-16-
