1. Safety Precautions
This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking).
Overvoltage category II; pollution degree 2.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the
following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
*
Do not exceed the maximum permissible input ratings
(danger of serious injury and/or destruction of the
equipment).
*
Replace a defective fuse only with a fuse of the original
rating. Never short-circuit fuse or fuse holding.
*
Disconnect test leads or probe from the measuring circuit
before switching modes or functions.
*
Check test leads and probes for faulty insulation or bare
wires before connection to the equipment.
*
To avoid electric shock, do not operate this product in wet or
damp conditions. Conduct measuring works only in dry
clothing and rubber shoes, i. e. on isolating mats.
*
Never touch the tips of the test leads or probe.
*
Comply with the warning labels and other info on the
equipment.
*
Always start with the highest measuring range when
measuring unknown values.
*
Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
*
Do not subject the equipment to shocks or strong vibrations.
-18-
