4.5. Capturing Minimum and Maximum Values
To activate the MAX/MIN mode, press the push-
button “F4”
(MAX/MIN), at measurement mode.
As shown in Figure, the Meter displays at the top of the
measurement page “MAX/MIN”. In addition, the recorded maximum,
average, and minimum values appear in the secondary display with
their respective elapsed times.
To stop a MIN/MAX recording session, press the Softkey labeled
“F2” (STOP). The summary information in the display freezes, and
the softkeys change function to allow saving the collected data.
Pressing the softkey labeled
“F4” (Close) exits the MIN/MAX record
session without saving the collected data.
To save the MIN/MAX screen data, the MIN/MAX-session must be
ended by pressing the softkey labeled
“F2” (Stop). Next, press the
softkey labeled
“F3” (Save).
-74-