7. Replacing the fuses
Warning:
To avoid electric shock, do not operate your meter until the back
cover is in place and fastened securely.
1. Disconnect the test leads from the meter and any item under
test.
2. Open the battery door by loosening 2 screws on the back cover
using a screw-driver.
3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use a fuse of the proper size and value.
6. Put the button case back in place. Insert the screws and tighten
it securely.
600mA/ 1000V F (flink) 6 x 32mm
10 A / 1000V F (flink) 10 x 38 mm
Warning:
To avoid electric shock, do not operate your meter until the back
cover is in place and fastened securely.
-58-